Kaleidoscope Lens and Prisms
The Kaleidoscope lens and Prisms were designed for use with the OPTI Solar 250 and thus can also be
used with the OPTI Solar 100C.
The Kaleidoscope Lens can also fit OPTI GoBoShow, GoBoPro and K4 projectors. Prisms and the
Panoramic Rotator can also fit onto the OPTI GoBoShow and GoBoPro projector lenses.
The OPTI Kaleidoscope Lens replaces the focussing
lens and repeats an effect as a six sided image.
Kaleidoscope Lens
FG6110 The barrel diameter is
42.5mm. This fits directly
into the OPTI Solar 250
and 100C projectors.
Adaptor rings are
supplied with the
Kaleidoscope Lens to
enable it to be used with
all OPTI projectors.
Prisms
Prisms fit onto the front of the projection lens of either the Solar 100C, Solar 250 or GoBo Range of
projectors. Prisms split, multiply and distort projected images.
Clip-on Prisms
OPTI Clip-on Prisms have two, three or four facets. Clip-on Prisms attach to the front focussing lens
of the OPTI Solar 250, Solar 100C, GoBoShow and GoBoPro projectors and reproduce the effect being
projected two, three or four times respectively. OPTI Clip-on Prisms can be swivelled to alter the spread
of the images.
Panoramic Rotator FG6060
The OPTI Panoramic Rotator is a motorised vertical
prism that attaches to the front focussing lens and
scans repeated images through 360°. The image
projected by the OPTI Panoramic Rotator appears
to split, spread out and contract in a continuous,
flowing linear motion.
The photograph shows an OPTI Panoramic Rotator
on an OPTI Solar 100C projector.
Home 
Artwork 
