 |
|
GoBoShow - TECHNICAL INFORMATION
|
|
Overall
size |
517mm
long x 289mm wide x 166mm deep (293mm deep with hanging bracket). |
|
Weight |
7.7kg. |
|
Standard lens |
3
Element 85mm f2.8.48.5mm smooth barrel. |
|
Mains voltage |
110-120V~
or 220-240V~ 50/60Hz. |
|
Power
consumption |
325 Watts maximum. |
|
12V~ output
current |
3A
maximum. |
|
Lamp type> |
Osram
HQI-T 150W single ended. |
|
Lamp life |
Average
9000 hours (change before 9000 hours). |
|
Total light output |
1550 lumens with new lamp. |
|
Colour temperature |
4200 K. |
|
Cooling |
Tubeaxial
exhaust and 3 speed centrifugal fans. |
|
DMX &
Shutter |
(Factory
Fitted Option) 1 Channel of DMX. |
|
DMX Plug |
5
pin XLR. |
|
GoBoShow Projectors GoBoShow Accessories GoBoShow Effects
GoBoShow projectors have an average life of 9,000 hours (2 years at 12
hours a day) and specially coated optics to increase overall light
output to 1,550 lumens, the OPTI GoBoShow meets the demand for clarity
of projected images over long periods.
The OPTI GoBoShow, available in black GS2051
or white GS2051W, is easy to install,
compact, lightweight and runs quietly with low operating costs. In
addition to the standard 85mm lens supplied, OPTI offer a range of
alternative focal length lenses.
The rails of the OPTI GoBoShow provide low voltage power for motorised
accessories. On the DMX and Shutter version the rails also pass
communication signals. Programmable accessories such as Autochangers,
or the X-Y Mirror, can automatically control the shutter function, as
well as allowing remote operation from a DMX lighting desk.
The two internal fans cool the optics of the OPTI GoBoShow as well as
heat sensitive effects and allow for duplicate 35mm slides to be used
for short term use at events like exhibitions.
The black OPTI GoBoShow (above right) is shown with Eight Static
Gobo Autochanger and optional Stand.
|
|
|
|
|
GoBo Range Autochangers
| All Autochanger variants are remotely controllable via infrared hand controller. The GoBo versions may also be controlled via DMX when used on either the OPTI GoBoShow or GoBoPro projectors fitted with the DMX and Shutter option. Automatic shutter closing during changes can also be programmed from these Autochangers when used on projectors fitted with the DMX and Shutter option. |
|
|
|
| |
|
|
Eight Static Gobo Autochanger
GoBo range GS6049*
Accepts any combination of up to eight 50mm diameter gobos. The number of images to be displayed and the time that they are to be shown are programmable. Requires 1 channel when operated via DMX. |
|
|
| |
|
|
Six Static Slide/Gobo Autochangers
GoBo range GS6039*
Accept any combination of up to six 50mm diameter gobos or duplicate 35mm slides. The number of images to be displayed and the time that they are to be shown are programmable. Blanking Plates (FG6038) are available to fill any unused positions when used on projectors without automatic shuttering. Requires 1 channel when operated via DMX. |
|
|
| |
|
|
Four Rotating Slide/Gobo Autochangers
GoBo range GS6035*
Accept any combination of up to four 50mm diameter gobos or duplicate 35mm slides. The number of images to be displayed, the time that they are to be shown, plus the speed and direction of rotation are all programmable. Blanking Plates (FG6038) are available to fill any unused positions when used on projectors without automatic shuttering. Requires 3 channels when operated via DMX. |
|
|
| |
|
|
Four 50mm Cassette Autochangers
GoBo range GS6386*
Accept any combination of up to four 50mm Effect Cassettes. The number of positions to be displayed, the time that they are to be shown, plus the speed and direction of rotation are all programmable. Requires 3 channels when operated via DMX. |
|
|
| * Available in Black or White. For White, add 'W' suffix to the code. i.e. GS6386W |
|
|
|
|
GoBo Range Clock Attachment
 For GoBo Range projectors the Clock fits and polugs into a Clock Adaptor. This is then fitted to the rails of the projector with the clock face over the cooling, air spout(15mm from the body of the projector).
 
GS6008 Roman
GS6010 Modern
GS6011 Custom
 For GoBo Range projectors the Clock fits and plugs into a Clock Adaptor. This is then fitted to the rails of the projector with the face over the cooling, air spout(15mm from the body of the projector).
|
|
|
|
<< Start < Prev 1 2 3 4 5 Next > End >>
|
Home 
GoBoShow Projector Accessories and Effects 
Manual 
